freedomRail Closet System Corner Rounder - Chrome
Item #: 046964255551 Stock Status: Out of stock
Price:
$13.25
The freedomRail Closet Rod Corner Rounder is exclusively designed for freedomRail closet systems by joining two matching Custom Size Chrome Hanging Closet Rods at their corner meeting point. The corner rounder is tapered so that ends fit snuggly inside the straight rods for a smooth transition that spans abutting walls, giving a clean appearance to your hanging clothes. Cover ends of straight rods using freedomRail Closet Rod Stops
The Closet Rod Corner Rounders may be adapted to non-freedomRail closet systems by taking some calculations. Measure 23 inches from each corner to allow for the corner rod. Then, based on these measurements, calculate the lengths of your straight rods. Keep in mind that the closet rod typically sits around 11 inches from the back wall. Be sure to order your straight rod a few inches longer than measurements and plan to cut excess with a hack saw or pipe cutter. Cut rod is not returnable.
Straight closet rods need support every 36 inches. Corner rounders require at least two supports. Purchase Closet Rod and Shelf Support Bracket or our 1 Inch Round Closet Rod Center Support Bracket, but choose either one or the other because these items have different measurements between the shelf and the rod. Please note that these two items are only available in chrome. Install supports close to the rod joints. Cap the ends of the rods using One Inch Closet Rod Flanges - Chrome (Set of 2).
Product Dimensions Additional Product Info
The Closet Rod Corner Rounders may be adapted to non-freedomRail closet systems by taking some calculations. Measure 23 inches from each corner to allow for the corner rod. Then, based on these measurements, calculate the lengths of your straight rods. Keep in mind that the closet rod typically sits around 11 inches from the back wall. Be sure to order your straight rod a few inches longer than measurements and plan to cut excess with a hack saw or pipe cutter. Cut rod is not returnable.
Straight closet rods need support every 36 inches. Corner rounders require at least two supports. Purchase Closet Rod and Shelf Support Bracket or our 1 Inch Round Closet Rod Center Support Bracket, but choose either one or the other because these items have different measurements between the shelf and the rod. Please note that these two items are only available in chrome. Install supports close to the rod joints. Cap the ends of the rods using One Inch Closet Rod Flanges - Chrome (Set of 2).
- freedomRail Chrome Closet Rod Corner Rounder Features:
- Heavy gauge tubing in a nickel finish.
- Curved shape transitions a closet rod around corners, expanding hanging area.
- Narrowed ends are sized to slide inside the corresponding Custom Size Chrome Hanging Closet Rod.
- Makes your closet corners look great while keeping hanging clothes neat.
- Sold individually.
- Important Product Information:
- Ground shipping only.
- Gift wrapping not available for this item.
Product Dimensions Additional Product Info