For help ordering this item, click here
Implement elegance and sturdy hanging storage for garments in a custom closet space with a Custom Size Oil Rubbed Bronze Closet Rod. This closet rod will require the pictured coordinating Oil Rubbed Bronze Rod Support Flanges to install into a custom closet design with industry standard 32 millimeter closet partitions. Flanges are sold separately as a set of two.
NOTE: The Qty field you will see in your cart will be the total footage calculated. The number and length of rods you requested will show as well. Please DO NOT change the Qty value in the cart.
Round Oil Rubbed Bronze Closet Rod Features
1 5/16" diameter closet rod is constructed with a high quality anodized aluminum in a warm and sophisticated oil rubbed bronze finish.
Rod is priced and sold by the foot, and is available in any custom length cut to the nearest half inch, up to 72" (6 feet) in length.
Install onto industry standard 32 millimeter custom closet panels, or into wall studs using a pair of Oil Rubbed Bronze Round Closet Rod Flanges, which are sold separately.
Please subtract approximately one half inch to accommodate the width of a pair of flanges.
Rods measuring an excess of 40" should be adequately supported with a center support when expected to hold loads heavier than a wardrobe.
Custom closet hardware adds a stylish and functional finishing touch to an upscale design in the master bedroom, or bold statement to an entryway coat closet.
To order your closet rod(s) simply enter the length in inches, then the quantity of rods you desire, and click Add to Cart. For example, if you would like to order four rods measuring three feet in length, enter "36" into the Length In Inches field, and then "4" into the Qty field. If you would like to order rods cut at different lengths, you must add them to the shopping cart separately. The total footage and cost of your rod(s) will be automatically calculated for you. Again, please DO NOT change the Qty value in the shopping cart.
|
The above dimensions are the outside measurements of the product at the largest point. All dimensions are in inches and may be rounded up to the nearest quarter inch.
-Width: Left to right dimension
-Height: Top to bottom dimension
-Depth: Front to back dimension
-Diameter: Width of a circle at the widest point
|
There is no additional information for this product.
|
|
;){kind=link}